Sony today releases the next big PS5 firmware version. Among other things, the system update plays support for M.2 SSDs, which allows the space of the PlayStation 5 to expand. The video below holds Sony Tips for installation - and shows how quickly the NVME SSDs install in the PS5. The necessary m.2 slot is located below the right side plate that you need to remove for installation. What it also has to pay attention to, you will learn in the following video. Previously, Sony had already released a guide to the compatibility of SSDs for PS5.
PCIe Gen4 X4 M.2 NVME SSDs are supported with a storage capacity between 250 GB and 4 TB. A sequential reading speed of 5500 MB / s or faster is recommended. The module width should be a maximum of 25 millimeters so that you can use the SSD in the PS5. Therefore pay attention to the M.2 types 2230, 2242, 2260, 2280 and 22110. In addition, the total height of the M.2-SSD must be less than 11.25 millimeters so that they are installed in the PlayStation 5 (Buy Now) can. M.2 SATA SSDs does not swallow the PS5. Many more information for installation is on the Sony Support website.
Users thus receive the opportunity to expand the storage space of their PS5 with the new firmware. By default, this is quite low with 825 gigabytes, with only 695 gigabytes for games and other files. Since a PS5 update published in the spring, games can finally be secured on an external medium. It can not be started from there. Before the release of the new PS5 firmware Sony, Sony let the great SSD update from interested players extensively tested.
From David Martin editor 15.09.2021 at 11:13
Comments
Post a Comment